Excel Dryer XL-GRV 208-277 Volt Hand Dryer, Speed & Sound Control, W/Heat

Excel Dryer XL-GR XLERATOR Hand Dryer
Most Excel Dryer XL-GR Graphite Xlerator orders will be
Lightning
Fast
Same Day Shipping. Shipping is FREE
of charge on all Xlerators to anywhere in the continental US!
Guaranteed lowest
Excel Dryer XL-GR
Graphite XLERATOR pricing, anywhere! We are a trusted, Master
Distributor for Excel Dryer. We normally carry a large inventory so the
Excel Dryer XL-GR
is always in stock. We will match or beat any online advertised
XL-GR
Xlerator price.
The
Excel Dryer XL-GR
Xlerator hand dryer is a zinc
die-cast cover with a graphite textured paint over it. The graphite is a
charcoal / gray color and is one of our most popular hand dryers at
ProDryers. We stock the XL-GR by the hundreds offering unbeatable
pricing and shipping costs are on us to anywhere in the local 48 US
states!
Enhanced Features
Adjustable Speed & Sound
Adjustable Heat Settings — High, Medium, Low And Off
Multi Voltage: 110-120V, 208-277V, 230V
Externally Visible Service LED To Assist With Troubleshooting (see owner’s manual for codes)
1.1 Quieter Nozzle Factory Installed (99.99% of our customers at ProDryers love the quieter nozzle)
Features
8 second Dry Time*
80% Less Energy Than Conventional Hand Dryers
95% Cost Savings Vs. Paper Towels
Made In USA Certified®
5-Year Limited Warranty
BuildingGreen® Listed and Helps Qualify for several LEED® credits
A Hygienic Hand Drying Solution
Over a Decade of Proven Performance
Virtually Maintenance Free
Dry Times and Energy Use
* See manufacturer’s website for testing methodologies.
Specifications
Dimensions
11 3/4″ LG. X 12 11/16″ HIGH X 6 11/16″ DEEP
(298 MM LG. X 322 MM HIGH X 170 MM DEEP)
Weight:16 LBS. (7.3 KGS.)
Construction
Hand dryer cover shall be a one-piece, heavy-duty, rib-reinforced,
die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and
all exposed surfaces shall be bright chrome plated or finished with
chip-proof, electrostatically applied epoxy paint and fastened to a wall
plate by two chrome plated tamper-proof bolts.
Hand dryer wall plate shall be equipped with (3) 7/8″ (22 mm)
diameter holes, one of which shall be suitable for use with surface
conduit, for ease of wiring.
All internal hand dryer parts shall be coated according to Underwriters’ Laboratories, Inc. requirements.
Entire mechanism shall be internally grounded.
Mechanism
Hand dryer motor shall be a series commutated through-flow
discharge vacuum motor/blower (5/8 HP / 20,000 RPM) which provides air
velocity of 16,000 LFM (linear feet per minute) at the air outlet and
14,000 LFM at the hands (4 inches [102 mm] below air outlet).
Hand dryer heating element (900 W) is constructed of Nichrome wire
and mounted inside the blower housing, thereby being vandal proof. It
shall be protected by an automatic resetting thermostat, which shall
open whenever air flow is cut off and shall close when flow of air is
resumed. It shall produce an air temperature of up to 135°F (57°C) at a
72°F (22°C) ambient room temperature at the hands (4 inches [102 mm]
below air outlet).
Hand dryer Control assembly is activated by an infrared optical
sensor located next to the air outlet. The dryer shall operate as long
as hands are under the air outlet. There is a 35-second lockout feature
if hands are not removed.
Limited Warranty
The hand dryer shall be guaranteed to be free from defects for a period
of five (5) years. Warranty shall include factory performed labor as
well as the repair or exchange of defective parts, at manufacturer’s
option.
Review the
Xlerator Hand Dryer Specs
Review the
Excel Dryer Xlerator Information Guide
Covering XL-BW, XL-W, XL-BL, XL-GR, XL-C, and XL-SB Models